Tens / Ems

Discussion in 'Health & Wellness' started by Bobby Cole, May 14, 2020.

  1. Bobby Cole

    Bobby Cole Supreme Member
    Task Force Registered

    Joined:
    Jan 21, 2015
    Messages:
    13,672
    Likes Received:
    26,221
    Here’s a small recommendation Ken.
    Because of this bicep tendon problem, I bought a TENS/ EMS machine to help manage the pain and to get better circulation throughout the area.
    On the TENS (transcutaneous electronic nerve stimulation) side of the machine, it sends a light array of electricity through the chosen area which kills the pain. On the EMS (electronic muscle stimulator) it does what it says. It stimulates the muscles and tendons which produces light to heavy contractions depending on the setting.
    Whether on the TENS side or the EMS side, there is a higher amount of circulation which leads to faster healing and the increased endorphins ain’t bad either.

    The whole thing cost me about $28 (Amazon) and I love the thing! I only hook up for about 10-15 minutes a day and I definitely feel like my recovery time has been shortened immensely!
    Of course, I also bought some elbow sleeves to help keep me from damaging the tendons any further but I did stop using any anti-inflammatory medicine and also quit having to tape up with K-tape.

    Note: I looked at your pic again and no....you do not look like you are enjoying things at all.
    Prayers for a fast healing!
     
    #1
    Patsy Faye likes this.
  2. Ken Anderson

    Ken Anderson Senior Staff
    Staff Member Senior Staff Greeter Task Force Registered

    Joined:
    Jan 21, 2015
    Messages:
    25,495
    Likes Received:
    45,681
    Thanks. It looks like the TENS/EMS machine can help with cramping too. I might order one.
     
    #2
  3. Bobby Cole

    Bobby Cole Supreme Member
    Task Force Registered

    Joined:
    Jan 21, 2015
    Messages:
    13,672
    Likes Received:
    26,221
    To be truthful, as many times as I have put too much strain on my back or some other dumb stuff, life would have been a lot easier if I had known about the machine a long time ago.
     
    #3
    Lois Winters likes this.
  4. Bobby Cole

    Bobby Cole Supreme Member
    Task Force Registered

    Joined:
    Jan 21, 2015
    Messages:
    13,672
    Likes Received:
    26,221
    When writing about the TENS machine in response to @Ken Anderson, there were a couple of things I didn’t know then that I find absolutely fascinating now.

    Whilst using the machine I noticed that when I move about even slightly, other connecting muscles are made manifest through the movements.
    For me, the most important thing about bodybuilding is to establish a muscle / brain connection and for some muscles like the flexors and other stabilizing muscles it is extremely hard to make that connection.
    I first made a better connection when I placed the pads on my upper forearms to relieve the tension throughout the bicep tendon and the long head of the bicep. With the machine running on the normal setting, I moved each digit of my hand and I could feel a new sensation in a different part of my arm and hand with each singular movement.
    Note, I already knew the muscle structure of my arm and hand but to actually visualize each segment and to make each one work on their own was nearly impossible but after a couple of sessions with the TENS, my brain has made a full connection to the segments and I’m starting to learn how to move each one independently.

    Now, I realize that this has seemingly little to do with walking as an exercise but think about it a bit. If one suffers an ankle sprain in the middle of nowhere, through a good brain / muscle connection one can know which muscles to incorporate in order to provide better support. Also, if one has studied some form of biofeedback especially on the pain relieving side, one can mentally pinpoint the area to concentrate on in order to help kill the pain.
     
    #4
    Ken Anderson and Lois Winters like this.
  5. Lois Winters

    Lois Winters Veteran Member
    Registered

    Joined:
    Oct 30, 2019
    Messages:
    5,218
    Likes Received:
    8,063
    I think I am going to try this machine. I've been pricing them and found one for about $25.00 on Amazon.
     
    #5
    Yvonne Smith likes this.
  6. Bobby Cole

    Bobby Cole Supreme Member
    Task Force Registered

    Joined:
    Jan 21, 2015
    Messages:
    13,672
    Likes Received:
    26,221
    It’s probably about the same thing as I have. As a caveat, do watch some YouTube videos because whilst it may be relatively harmless, if you make a mistake you will undoubtedly know about it instantly.
    For instance, do NOT attempt to move the pads until you shut the machine off. I got a small “surprise buzz” through my thumb when I tried moving one of the pads and it’s something I am not going to do again. It isn’t as though it hurt necessarily but the pads are sticky so when I tried moving the pad, it wouldn’t release from my thumb until I shut the machine off.
    The problem I had is it surprised me and whilst trying to turn it off I was busy shaking the one hand to get rid of the pad and in a moment of frustration I accidentally turned the power up instead of off and that’s when I really got busy! I must have looked like I was in an excerpt out of some slap stick comedy!!

    Needless to say, I started watching a couple of videos and learned how to properly use the TENS without having to employ the trial and error method.
     
    #6
  7. Lois Winters

    Lois Winters Veteran Member
    Registered

    Joined:
    Oct 30, 2019
    Messages:
    5,218
    Likes Received:
    8,063
    Thank you for the head up, Yvonne. I'll watch the vids first.
     
    #7
  8. Lois Winters

    Lois Winters Veteran Member
    Registered

    Joined:
    Oct 30, 2019
    Messages:
    5,218
    Likes Received:
    8,063
     
    #8
  9. Ken Anderson

    Ken Anderson Senior Staff
    Staff Member Senior Staff Greeter Task Force Registered

    Joined:
    Jan 21, 2015
    Messages:
    25,495
    Likes Received:
    45,681
    @Bobby Cole, my TENS machine was just delivered a little while ago, so I need to read the instructions, in several different languages.
     
    #9
    Bobby Cole and Von Jones like this.
  10. Von Jones

    Von Jones Supreme Member
    Registered

    Joined:
    Jan 25, 2015
    Messages:
    6,821
    Likes Received:
    9,767
    I hope you can find one that you can understand. My English just doesn't fess up to those instruction booklets. :D
     
    #10
  11. Bobby Cole

    Bobby Cole Supreme Member
    Task Force Registered

    Joined:
    Jan 21, 2015
    Messages:
    13,672
    Likes Received:
    26,221
    Sooooo, how did it go? Have you turned the knob on to #5+ just to see what would happen?
    Did you get a little frustrated with the directions and go to YouTube yet?
     
    #11
  12. Bobby Cole

    Bobby Cole Supreme Member
    Task Force Registered

    Joined:
    Jan 21, 2015
    Messages:
    13,672
    Likes Received:
    26,221
    The booklets I REALLY enjoy are the ones with multiple languages and also written in such small print ya can’t tell the difference between Chinese and English without a pair of binoculars.
     
    #12
  13. Von Jones

    Von Jones Supreme Member
    Registered

    Joined:
    Jan 25, 2015
    Messages:
    6,821
    Likes Received:
    9,767
    [​IMG]
     
    #13
    Lois Winters and Bobby Cole like this.
  14. Ken Anderson

    Ken Anderson Senior Staff
    Staff Member Senior Staff Greeter Task Force Registered

    Joined:
    Jan 21, 2015
    Messages:
    25,495
    Likes Received:
    45,681
    I moved the TENS/EMS posts here, from the Walking for Exercise & Fun thread because I wanted to talk more about it, and there were already enough posts to justify it.

    So far, I'm not impressed but I'm sure that's because I can't figure out how to use it. The instructions give me a headache, largely because they try to cover a thousand things in very small print and illustrations that I'd need a magnifying glass to see, when all I really want to learn how to do is one thing. When I think I understand what I need to do, and try to do it, nothing seems to work. When I turn the machine on, the display lights up (and yes, the batteries are charged). I can figure out mode part of it just fine, but the light goes out on machine whenever there's a half-second of inactivity so I can't really see what's going on. The plus buttons that are supposed to increase the intensity don't seem to do a thing. Since it wasn't doing anything, to begin with, I don't know what to expect, but pressing the intensity buttons change nothing on the display and I am feeling absolutely nothing. The electrodes fall off constantly, so that might have something to do with it too. I have put it back in the box, happy that I didn't pay a lot of money for it. My choices were to put it back in the box or throw it up against the wall, and either of these choices is as useful as trying to follow the directions. So, I am feeling pretty pessimistic about it right now. The instructions are too small to read, and they talk more about what can be done than how to do any of it, and the machine itself won't stay lit long enough for me to experiment with it.
     
    #14
  15. Ken Anderson

    Ken Anderson Senior Staff
    Staff Member Senior Staff Greeter Task Force Registered

    Joined:
    Jan 21, 2015
    Messages:
    25,495
    Likes Received:
    45,681
    Maybe I'll figure it out sometime but I'm angry with it right now.
     
    #15
    Yvonne Smith and Lois Winters like this.

Share This Page